|
APPR_PIC.ADJ |
  
|
|
APPR_PIC.ADJ |
|
APPR_PIC.ADJ
Adjusting the Size and Position of the Picture on Appraisals
============================================================
On the appraisal Format screen there are four numbers you need to enter
to define a box where the appraisal fits. The Top and Bottom of the
picture box are measured from the top
+---------------------------+ of the appraisal form. The Left and Right
| ^ ^ | of the picture box are measured from the
| | | | left edge of the appraisal form.
| 6.7"Top 9.0" Bottom| The maximum size of the example picture
| | | | box at the left is 2.3" tall and 6.25"
| v | | wide. The actual picture will not distort
| +-------+-------+ | to fit the box, instead it will fit as
|<-1.75"->|Left v | | at the top and left edge of the box
| +---------------+ | as much as possible without distortion.
|<-8.00"-----------------> |
| Right | As an example, if you wanted to move the
+---------------------------+ picture down 1", to the right 2" and
make the maximum picture height 1" you would change the picture
coordinates to : Top: 7.70"
Bottom: 8.70"
Left: 3.75"
Right: 8.00"